塑膠鍍鉻油墨，塑膠表面鍍鉻油墨 

油墨類型：在物件表面電鍍后，一般油墨難以在其表面附著，8系列油墨較好地解決了該問題。MPA系列油墨屬雙組份加溫反應型油墨，在電鍍表面、硬化亞克力和噴漆面上都表現出特別好的附著力，耐酒精、耐磨擦、抗劃傷性能突出。較低溫度（低于90℃）干燥，非常適合塑料件電鍍表面的印刷品使用。
用途：適用電鍍面，噴漆面、鋁片，150℃高溫下在不銹鋼表面也有很好的附著力。
墨膜外觀：平滑、耐刮傷、光面效果
覆蓋能力：使用300目網版，每公斤油墨約印刷30平方米。

干燥時間：自然干燥（25℃）表干為10分鐘，必需60-80℃強制干燥30-60分鐘，即可實干，形成附著力。

Ink type: after electroplating on the surface of the object, the general ink is difficult to attach to its surface. The 8 series of ink can solve the problem well. MPA series ink is a two component heating reaction ink. It shows excellent adhesion on the electroplating surface, hardened acrylic and spray paint surface, and is excellent in alcohol resistance, abrasion resistance and scratch resistance. The lower temperature (less than 90 C) is dry, which is very suitable for the use of the printed material on the surface of the plastic parts.
Application: it is suitable for electroplating surface, spray paint surface, aluminum sheet, and good adhesion on the surface of stainless steel under 150 C.
The appearance of the ink film: smooth, scratch resistant, and glossy effect
Covering capacity: using 300 mesh screen, each kilogram of ink is about 30 square meters.
Drying time: natural drying (25 C) for 10 minutes and 30-60 minutes of compulsory drying at 60-80 C. It can be dry and form adhesion.

[本信息來自于今日推薦網]