塑膠鍍鎳油墨 塑膠表面鍍鎳油墨 

產品特點：
      亮光，無溶劑，自然干燥固化劑型，干燥速度快，可有效的節省地方和能源。附著力強，電鍍   電鍍表面   真空電鍍 部分硬質塑膠，金屬   五金  玻璃 商標   銘板  鍵盤。
 
適用于：
      適合印刷電鍍   真空電鍍   塑膠電鍍  水電鍍   等塑料表面。
檢驗項目 測試條件 檢驗結果 輔助劑
耐酒精性 500克力/酒精2500次 無變化 S-10
耐磨性 500克力/3000來回 無變化  
耐堿性 浸泡5%NAOH*24HR 無變化  
干燥條件 過UV光源照射  

 
使用說明
1、網 板：77T-140T聚脂絲網印版（絲印/移印均可）
2、膠 刮：建議使用70-85度聚氨酯膠刮
3、參考用量：300目網板印刷約為30㎡/㎏
4、選用溶劑：請選用我司配套的固化劑，因印刷環境溫度、通用量及印刷圖案大小不同進行適當選擇

5、網板清洗：選用有機溶劑清洗（如：洗網水）

Product features:
Light, no solvent, natural drying curing dosage form, dry speed, can effectively save local and energy. Strong adhesion, electroplating and electroplating surface vacuum electroplating part of the hard plastic, metal metal glass trademark inscribed board keyboard.

Apply to:
It is suitable for printing and electroplating, vacuum electroplating, electroplating, electroplating and other plastic surfaces.
Test condition test result auxiliary agent
Alcohol tolerance of 500 grams of alcohol / 2500 no change in S-10
The wear resistance of 500 grams of /3000 and no change
No change in alkaline soaking 5%NAOH*24HR
Drying conditions over UV light source


Instructions
1, net board: 77T-140T polyester screen printing plate (silk printing / transfer can be)
2. Scraping: it is recommended to use 70-85 degrees of polyurethane scraping
3, dosage: 300 mesh screen printing is about 30 kg / square meters
4, choose the solvent: please choose the curing agent of our company, suitable selection of the printing environment temperature, the general quantity and the size of the printing pattern.
5, net plate cleaning: use organic solvent cleaning (such as: washing water)

[本信息來自于今日推薦網]