抗溶性泡沫滅火劑 3%（S/AR、-35℃）--耐海水 6%（S/AR、-35 

合成抗溶泡誄滅火劑可以用于固定式泡沬滅火系統或移動式泡 沫滅火系統中，廣泛用于撲救醇、離、BB、風胺、圖、有機 酸等可燃極性溶劑，亦可以用于撲救各類油類火災。廣泛用于 大型化工廠、化纖廠、油漆廠、溶劑廠、酒精廠、頡酒廠化工 產品倉庫等防災場所。它是一種新型高效的抗溶泡沫滅火劑， 該泡沫滅火劑具有良好的流動性能，與水按3:97和6:94的配比 進行混合后，通過泡沬產生裝置直接噴射在火源表面，農絕空 氣迅速滅火，具有儲存穩定，腐燭性低等優點。

混合比：

S/AR3%型與水的混合比為3: 97

S/AR6%型與水的混合比為6： 94

包裝、運輸及貯存要求：

機產品包裝為25Kg、50Kg、200Kg塑桶，1000Kg噸桶。

b、產品在運輸、貯存期間不得混入其它化學品及其它類型的 泡沫滅火剤。

C、產品應存放在陰涼、干燥的庫房內，防止曝曬，貯存的環 境溫度低于45紀，高于其最低使用溫度。

d、本公司可為您配制耐寒型及低粘度型產品。

 Overview:

Synthetic anti-foam foam fire extinguishing agent can be used in fixed foam fire extinguishing system or mobie foam fire extinguishing system. It is widely used to save flammable polar solvents such as alcohol, ether, ketone, aldehyde, amine, ester, organic add, etc. Fight all kinds of oil fires. Widely used In large chemical plants, chemical fiber plants, paint plants, solvent plants, alcohol plants, brewery chemical product warehouses and other disaster prevention sites. It is a new type of highly effective anti-solvent foaming agent. It has good flow properties. K is mixed with water in a ratio of 3:97 and 6:94, and then directly sprayed on the surface of the Are source through a foam generating device. The air Is quickly extinguished by Are, and has the advantages of stable storage and low corrosivity.

mixing ratio:

S/AR 3% type and water mixing ratio is 3:97 S/AR 6% type and water mixing ratio Is 6:94 Packaging, transportation and storage requirements:

The product packaging is 25Kg, 50Kg, 200Kg plastic drum. 1000Kg ton barrel.

Products must not be mixed with other chemicals and other types of foam fire extinguishing agents during transportation and storage.

The product should be stored in a cool, dry warehouse to prevent exposure. The ambient temperature of storage is lower than 45*0, which is higher than Its minimum use temperature.

The company can prepare cokl-resistant and low-viscosity products for you.