一般用于天然氣較為常見的是氫化丁腈O型圈，而我司考慮到由此而公司用于天然氣產品中的丁腈材質，以下是物性報告的檢測結果：

物 性 測 試 報 告                                                                   

Compound: NBR70耐天然氣                                                                   

 ASTM D2000 M2BG7014A14B14EO14EO34F16                                                                

Original Properties 【基本物性】                                        "SPEC

規格值"  " Test Result

測試結果"             "Test Method

測試方法"     

Hardness Shore A 【硬度】                                         70±5     72          D2240   

Tensile Strength,MPA,MIN 【拉伸強度】                                    14   17.9              D412     

Ultimate Elongation,%,MIN 【拉斷伸長率】                                           250 518.1            D412     

Specific Gravity (g/cm3)【比重】                                        1.22±0.03    1.241            D297     

Heat Resistance 70H,at 100℃【耐熱老化】                                                           D573     

Change In Hardness,Points,【硬度變化】                                          ±15    +7                

Change In Tensiles Strengths,MAX %【拉伸強度變化】                                         -20  +10.3                  

Change In Ultimate Elongation,MAX %【伸長率變化】                                          -40        -20.3                   

Button(Ress cure 170℃*10Min)                                                                     

Compressions Set,MAX %,22H at 100℃【壓縮永久變形】B14                                      25   15          D395     

Fluid Resistance NO.1 Oil 70H at 100℃【耐#1油老化】                                                             D471     

耐低溫測試                                                                  

Resistance To Low temperature -35℃ 3Min      Pass                                                                 D2137   

丁腈材質是一種衍生性很強的材質，他也可增加耐磨劑，加強耐磨效果�？梢哉{配成耐低溫產品，性價比高，可用性非常的強。如有疑問可致電0574-81877896 旭美克密封件有限公司。