絲印耐酸堿尼龍油墨特耐酸耐堿抗腐蝕性油墨 

（壹）產品特性：高光澤、高色彩、耐酒精、耐汽油、自幹、免烘烤、單組份/雙組份、環保絲印移印均可。
（二）適用對象：尼龍
（三）適用行業：機械、交通工具、旅遊用品等
(四）使用方法：1)網目 ：150目-420網目，具體情況根據實際印刷的效果采取網目； 2)網版 ：耐有機溶劑感光膠制作網版 3)刮刀 ：耐溶劑刮刀,如聚胺脂刮刀。
（五）註意事項：1）根據被印物特性以及印刷臺板等情況需要，可添加20%-30%專用稀釋劑進行濃度稀釋調整，特殊類產品需先進行表面處理。2）不同廠家的油墨不可以混合使用，以免發生化學等危險行為。

（6)買家須知：1）油墨為自然幹燥型：表幹為8-10分鐘，實幹為8-10小時，最好以24小時為標準；2）如希望油墨幹得快，可以在印刷過程中，加快幹水或者印刷後采取采取烘幹方式，溫度控制在80度-140度左右；30)如希望油墨幹得慢點，可以適當加慢幹水。

(a) product features: high gloss, high color, alcohol resistant, resistant to gasoline, dry, baking free, single / double component, green screen printing can be.
(two) applicable object: Nylon
(three) applicable industry: machinery, transportation, tourist goods, etc.
(four) use methods: 1) mesh: 150 mesh -420 mesh, specific case is taken according to the actual printing effect; 2) screen: organic solvent photosensitive adhesive, screen 3) scraper: solvent resistant scraper, such as polyamine scraper.
(five) matters needing attention: 1) according to the characteristics of printed matter and printing platform, we can add 20%-30% special diluent to adjust concentration dilution, and the special products need surface treatment first. 2) different manufacturers of ink can not be used mixed, so as to avoid chemical and other dangerous behavior.
(6) Notice: 1) for natural drying ink: dry for 8-10 minutes, 8-10 hours for work, 24 hours for the best standards; 2) if the ink dry quickly, can be in the printing process, to speed up the dry water after printing or take the way of drying, temperature controlled at 80 degrees -140 degrees; 30) if the ink dry slowly, you can add a retarder.

[本信息來自于今日推薦網]